Triton X-SCALE/X2 Configuration Manual - Manual (Page 51)

4 1
D
IAGNOSTICS
S
CAN
C
ARD
A CCESS I NSTRUCTIONS :
1. From the D
IAGNOSTICS
screen, select the C
ARD
R
EADER
option by pressing <5> on the keypad.
2. From the C ARD R EADER option, select S CAN C ARD by pressing <3> on the keypad.
If the card is damaged or not a standard format, an error message will be displayed. If this happens, the card
cannot be used for transactions on the terminal.
D ESCRIPTION :
The S CAN C ARD function reports the number of tracks the card reader is able to scan. It prompts you to
insert and remove a card. Upon removing the card, a management report dialog is displayed. If the card can
be read properly, the information from the tracks on the card will be displayed. This report can be printed to
the receipt printer or saved to an external memory device.
Press <3> on the keypad. When prompted, insert and remove a card. The dialog box will either verify
the tracks scanned or respond with an error message.