Triton X-SCALE/X2 Configuration Manual - Manual (Page 173)

T
ERMINAL
S
TATUS
163
S
AVE
/ R
ESTORE
P
ARAMETERS USING AN
E
XTERNAL
S
TORAGE
D
EVICE
A
CCESS
I
NSTRUCTIONS
:
1. From the T
ERMINAL
S
TATUS
screen, select the S
AVE
P
ARAMETERS TO
E
XTERNAL
S
TORAGE
option by
pressing <6> on the keypad.
2. From the T
ERMINAL
S
TATUS
screen, select the R
ESTORE
P
ARAMETERS FROM
E
XTERNAL
S
TORAGE
option
by pressing <7> on the keypad.
D
ESCRIPTION
:
The S
AVE
P
ARAMETERS TO
E
XTERNAL
S
TORAGE
function saves the current terminal parameters to an external
storage device (jumpdrive) attached to a USB port.
! Install the jumpdrive to any unused USB port.
! Select <6> on the keypad. The following prompts appear. Press
NTER
> to continue.
D
ESCRIPTION
:
The R
ESTORE
P
ARAMETERS FROM
E
XTERNAL
S
TORAGE
function restores a previously saved set of parameters
from an external storage device (jumpdrive).
! Enter a name for this saved parameter file. Press
NTER
>.
! At the confirmation dialog, remove the jumpdrive.
! Select <7> on the keypad. The following screen
appears.
! L
OOK IN
. Press <1> to cycle through the destinations
of the saved parameter file. Select “USB D
EVICE
”.
! F
ILES OF TYPE
. Press <2> to select the saved param-
eter file type and name. Use the
RROW
> keys to
move up/down in the list of files. Press
NTER
> to
select the highlighted file.
! Install the jumpdrive to any unused USB port.
! The saved parameters will be loaded on the terminal. At the confirmation dialog, remove the jumpdrive.