Triton X-SCALE/X2 Configuration Manual - Manual (Page 373)

enabled/disabled through host communications and is not configurable in Management
Functions.
Please refer to “Triton Terminal Communications Protocol And Message Format Specification”,
version TSCD5.34 or later for details on this feature.
Note: Turning on this feature will cause journal records to be audited and may not be retrieved
from Triton Connect or viewed at the terminal through the “Display Unaudited Records”
feature. Old journal records can still be viewed using “Display Last X”.
UPS Support
If a UPS is connected to the ATM, this software release has the capability to detect if the system
is on UPS power and shut down the ATM at the first idle time. The ATM will power up
immediately when main power has been restored. Please contact Triton Technical Support for
information on supported UPS devices and cables.
Report SPED Low Battery to Triton Connect
This software release will send a warning message (error code 241) to Triton Connect if the
SPED battery is low. This error will not take the terminal out of service, and the ATM will
contact Triton Connect to clear the error once the battery has been replaced.
No Online Help
The online help in Management Functions has been removed for the RL2000 ATM.
No Text Receipts
The RL2000 uses a USB printer which has much faster communications than the serial printer on
the RL5000. Due to this print speed increase, the option to select “text” receipts has been
removed and all receipts are printed as “graphics”.
New Load File Format
Software load files for the RL2000 will have a “tfv” extension rather than “tlf”. The “tfv” format
is slightly different and provides a method for Triton to sign each load file and only install
verified software updates.
Note: Triton Connect version 4.4 is required to send a “tfv” software update to the ATM.
Software Release Notes
Triton Systems Page 14 of 17 November 16, 2007