Triton X-SCALE/X2 Configuration Manual - Manual (Page 196)

Software Release Notes
Triton Systems Page 5 of 16 January 10, 2007
stored. Older versions of Triton Connect will display the dispense status of 255 for these records
that have been created using this new method. A new version of Triton Connect (version 4.3.8
or greater) will be released to correct this issue. Also, the correct dispense status is stored in a
text record following the transaction record where the issue occurred.
Enhanced reporting and clearing a 231 (Stuck Card Warning)
231 is a warning code that is issued from the terminal that indicates that a customer has left their
card in the terminal. This release will sample the card reader for a timeout period before setting
this warning condition. Once the card is removed this warning condition will be cleared.
Corrected 188/190 Error Reporting
This version of software will correctly report a 188 (Communications Key Not Configured)/ 190
(Master Key Not Configured) error.
Permanent TCP Connection
The socket for permanent connection would block from receiving data if the host did not respond
to a request within the specified Timeout setting. Now the terminal will detect this condition and
rebuild the socket when this occurs.
Space-filled phone numbers
This release will no longer validate a space filled number for dialing. If this is encountered the
number will not be attempted.
Reloading Paper
This release does not require the terminal owner to go into diagnostics and reset the printer when
reloading paper. If the terminal is configured to be in service with printer errors and an out of
paper event occurs, the terminal will reset the printer automatically when paper is reloaded.
MAC Calculations
This release will reattempt MAC calculations up to 3 times if communications fail between the
SPED and the terminal.
Error codes 382 (All Cassettes Disabled) With TDM
This release corrects an issue with an uninitialized variable that upon system start up disabled
cassettes.
New Features Added
Added Capability to Configure Users Passwords and Names from
Triton Connect
The terminal will now allow for remote changes to User Passwords and Names through Triton
Connect. This change requires Triton Connect Version 4.3.8 or greater.