Triton X-SCALE/X2 Configuration Manual - Manual (Page 350)

Here is the behavior based on customer selection:
1. Customer chooses YES. Go directly to the PIN entry screen. The customer’s ATM card
will not need to be re-scanned. After successful PIN entry, the Transaction Selection
screen will be presented.
2. Customer chooses NO. Display the Exit Message then return to the Welcome screen.
3. Customer does nothing. After 15 seconds the “Need More Time?” prompt appears. If
the Customer selects YES within 15 seconds, the continuation prompt will be displayed
and repeat the previous steps. If the customer selects NO, or does not select an option
within 15 seconds, the Exit Message is displayed and the transaction is completed.
Withdrawal – No Receipt Option
This release contains a new transaction type called “Withdrawal – No Receipt” that can be
presented to the customer on the select transaction screen. This selection will execute a standard
withdrawal transaction but will only print a receipt if the transaction is unsuccessful.
Bill Mix Methods
In previous software releases, if 2 or more cassettes contained the same denomination then all
bills would be dispensed from one cassette before using the second. A new bill mix method has
been added to alternate between cassettes of like denomination for each transaction. The bill mix
methods are:
• Minimize (the current method)
• Minimize EW (for “Even Wear”)
This option can be configured in Management => Terminal Configuration => Cassette Setup.
Journal Data in Host Response
This software release contains a new feature to allow journal data to be sent to the host in a
transaction or configuration download response message. This feature can only be
enabled/disabled through host communications and is not configurable in Management
Functions.
Please refer to “Triton Terminal Communications Protocol And Message Format Specification”,
version TSCD5.34 or later for details on this feature.
Note: Turning on this feature will cause journal records to be audited and may not be retrieved
from Triton Connect or viewed at the terminal through the “Display Unaudited Records”
feature. Old journal records can still be viewed using “Display Last X”.
X2 2.0.1 Software Release Notes
Triton Systems Page 15 of 19 October 23, 2007