Triton X-SCALE/X2 Configuration Manual - Manual (Page 316)

The following is the dialog box that is used to configure the Outgoing Port address:
A setting of 0 allows the terminal to operate in a mode that is compatible with the 1.7.0 or prior
releases. Any other values will force the out going port address to equal this setting.
Power Failure During Dispense
Changes have been made to how the terminal logs a power failure that occurs during a dispense
operation. Previous releases would log the transaction record with a dispensed amount of zero
and no reversal. This has been changed to the following if a power failure occurs at this time:
Software Release Notes
Triton Systems Page 12 of 30 July 26, 2007