Triton X-SCALE/X2 Configuration Manual - Manual (Page 16)

6
X-S
CALE
/ X2 C
ONFIGURATION
M
ANUAL
1. Enter Management Functions and
<1>. Enter the default password ‘001234’.
2. The Main Menu appears. Error code ‘246’
appears at right and its description “Master pass-
word must be changed from default”.
C
HANGING
D
EFAULT
P
ASSWORDS
Select option <4>, PASSWORD MAINTENANCE.
3. Select option <1>, CHANGE USER PASS-
WORD.
4. Enter a new Master password.
NOTE: The terminal password consists of a 2-
digit ID code and a Password of 4-12 digits. ‘00’ is
the Master ID code and cannot be changed. Only
enter the password digits!
Example: If you enter ‘5566’, then the Master pass-
word will be changed to ‘005566’. If you enter
‘005566’, then the Master password will be
changed to ‘00005566’.
NOTE: You will prompted to “Reconfirm” the
new password.
5. Exit out of Management Functions. The
terminal Master password has changed.