X2 c – Triton X-SCALE/X2 Configuration Manual User Manual
Page 52
4 2
X-S
CALE
/ X2 C
ONFIGURATION
M
ANUAL
A
CCESS
I
NSTRUCTIONS
:
1.
From the D
IAGNOSTICS
screen, select the P
RINTER
option by pressing <6> on the keypad.
P
RINTER
D
ESCRIPTION
:
The P
RINTER
option allows the terminal operator to perform the following functions:
1.
D
EVICE
S
TATUS
. Displays a management report that shows properties of the terminal printer, such as
printer name, assigned port, driver version, and printer resolution.
2.
R
EST
/ T
EST
P
RINTER
. This function tests the terminal printer by printing sample text using various
font styles and sizes.
3.
C
ONFIGURE
P
RINTER
. This function enables you to setup the operating parameters for the terminal
printer.
D
EVICE
S
TATUS
A
CCESS
I
NSTRUCTIONS
:
1.
From the D
IAGNOSTICS
screen, select the P
RINTER
op-
tion by pressing <6> on the keypad.
2.
Select D
EVICE
S
TATUS
by pressing <1> on the keypad.
D
ESCRIPTION
:
D
EVICE
S
TATUS
displays a report that shows properties of the
terminal printer, such as printer name, status, errors, etc.
The report is displayed in a Management Report dialog, which
can be printed to the receipt printer or saved to an external
memory device.
Store Message
Terminal ID: 75200
4/7/2008 11:00:00 AM
*** Device Status ***
Device ID: Seiko LTP2342
Device Status: 0 (Device Ready)
Online: Yes
Out Of Paper: No
Low Paper: No
Print Job Pending: No
Cover Open: No
Presenter Open: No
Hardware Error: No
Thermal Head Error: No
Voltage Error: No
Head Up Error: No
Auto Cut Error: No
Close Head Required: No
Printer presenter paper not detected.: No
Presenter Exit Blocked: No
Presenter Roller Blocked: No
Presenter Roller & Exit Blocked: No
Presenter Installed: Yes
Presenter Stored: Yes
Paper Width: 80mm