Triton X-SCALE/X2 Configuration Manual - Manual (Page 103)

9 3
S
YSTEM
P
ARAMETERS
S
OFTWARE
U
PDATE
A CCESS I NSTRUCTIONS :
1. From the S
YSTEM
P
ARAMETERS
screen, select the S
OFTWARE
U
PDATE
option by pressing <7> on the
keypad.
This step procedure describes how to perform a software update for the RL/FT5000/RL/RT2000. You
will need a Flash drive device (USB storage device) with the terminal software loaded in it.
Connect the USB external memory device to the Docking Board assembly (X-Scale) or the X2 Main
Board assembly (X2). Make sure to allow time for the memory device to be read by the terminal.
D ESCRIPTION :
The P ERFORM S OFTWARE U PDATES function will load/update the software components with the software file
stored on an external memory device. The update version must be greater than the current version running
on the terminal. If not, it will “fallback” to the current version.
Note: X2 equipped units use load file format Triton#.TFV extensions. X-Scale equipped units use
load file format Triton#.TLF extension. The terminal will not accept a load file it is not equipped
for.
X-Scale
X2