Triton X-SCALE/X2 Configuration Manual - Manual (Page 327)

ICC Latching
This option will activate the mechanical latching mechanism on the MagTek Dip style
card reader to provide some feed back to the customer to leave the card in the reader until
the terminal prompts the user to remove their card. By default this option is enabled.
Non-ICC Transactions
With this option enabled, the terminal will accept Cards that do not have an IC on them.
Allowing the terminal to process transactions using Magnetic Stripe only cards along
with EMV ICCs. By default this option is enabled.
ICC Fallback to Magnetic Stripe
This option will allow ICC’s that fail to communicate using the EMV standard to
continue the transaction using the data on the Magnetic Stripe of the ICC. By default this
option is enabled.
** Note – this may shift the liability for this transaction.
EMV Journal Entries
This option will include the Extra EMV Data generated for a transaction with the regulart
ransaction record in the electronic journal. By default this option is enabled.
** Note – This option increases the average Journal Entry by 120 bytes, which may
cause the electronic journal size to increase rapidly.
Terminal EMV Configuration
This option will display the current EMV Configuration of the Terminal.
Last Transaction’s EMV Data
This option will display all of the EMV data that was collected by the terminal on the
previous EMV transaction.
**Note - This data does not persist through a power loss.
EMV Application Settings
The following dialog will be displayed when “EMV Application Settings” option is selected
from the “EMV Configuration” dialog. Applications can be enabled/disabled by navigation
up/down using the left/right arrow keys on the keypad and selecting the “Ctrl” key to toggle the
setting.
Software Release Notes
Triton Systems Page 23 of 30 July 26, 2007