Triton X-SCALE/X2 Configuration Manual - Manual (Page 140)

130
X-S
CALE
/ X2 C
ONFIGURATION
M
ANUAL
D
ELETE
/ E
DIT
A
CCESS
I
NSTRUCTIONS
:
1. From the A
DS
G
RAPHICS
screen, select the D
ELETE
option by pressing <2> on the keypad.
3. From the A
DS
G
RAPHICS
screen, select the E
DIT
option by pressing <3> on the keypad.
D
ESCRIPTION
:
The D
ELETE
function removes an Ad graphic entry from the display list NOT the hard drive. To delete a
graphic:
! Use the
RROW
> keys on the keypad to highlight the graphic you want to remove. Press <2> on the
keypad. A confirmation dialog appears. Press
NTER
> to delete the highlighted entry.
The E
DIT
function allows you to change the Ad Properties (Duration, Active Hours, or Active Ad Field) of
the selected Ad graphic.
! With the Ads/Graphics main dialog displayed, use the
RROW
> keys to highlight an ad entry in the
list. Press <3> on the keypad to bring up the Ad Properties dialog which you will use to edit the ad.
The Ad Properties dialog allows you to view and/or configure the following Ad graphic display properties:
1. F
ILENAME
. This option is disabled. The name of the graphic file that was selected in the Ads/Graphics
dialog is displayed.
2. D
URATION
. This is the length of time (in seconds) the indicated Ad graphic will be displayed on the
terminal screen. To set the time, press <2> on the keypad to bring up a data entry dialog. Enter the duration
in seconds.
3. A
CTIVE
H
OURS
. By default, the graphic will be displayed every hour of the day. If you want to restrict the
display of the graphic to particular hours of the day, leave a checkmark next to the hour in which you want
to display the graphic. Remove the checkmark from those hours in which you don't want the graphic to be
displayed.
To configure the Active Hours for the current ad graphic, press <3> on the keypad to move a highlight bar
to the first selection in the Active Hours window, then use the
RROW
> keys on the keypad to move up and
down in the list. Press the key on the keypad to toggle a highlighted selection between checked
and unchecked.
4. A
CTIVE
A
D
F
IELD
. Select the location(s) where the ad graphic will be displayed and/or printed:
• Advertisement
• Coupon Graphic
To configure the Active Ad Field for the current ad graphic, press <4> on the keypad to move a highlight bar
to the first selection in the Active Ad Field window, then use the
RROW
> keys on the keypad to move up
and down in the list. Press the key on the keypad to toggle a highlighted selection between
checked and not checked. Press
NTER
> on the keypad to accept the current Ad Properties settings.
• Logo
• Receipt Graphic