Multichannel Systems MC_Rack Manual - Manual (Page 86)

MC_Rack Manual
80
Wireless Recording System
The wireless in vivo recording system is the all-in one solution for amplifying, recording, and
analyzing in vivo data from eight channels that uses a wireless connection between headstage
and receiver and an USB 2.0 connection to transfer digitized data to any connected computer.
Please read the Wireless-System manual for detailed information. Select USB MEA from the left
Data Source drop down list. The W8-System device for example, will be specified on the right
Data Source drop down menu: MCS WPA8 (S/N: 00001). The number in brackets is the serial
number of the system. The data source layout is 1 dimensional, with 8 electrode channels and
an additional digital channel.
Note: With all electrode channels, the maximum sampling rate for the Wireless Recording System
is 20 kHz. It is possible to increase the maximum sampling rate up to 40 kHz by deactivating at
least four electrode channels. Please pay attention to the sampling rate respectively, when using
the W4-, W16- or W32-System.