Multichannel Systems MC_Rack Manual - Manual (Page 156)

MC_Rack Manual
150
1. Channel / Unit
2. Number of Spikes
3. Mean Spike Frequency [Hz]
4. Number of Bursts
5. Bursts per Second
6. Bursts per Minute
7. % of Spikes in Burst
8. Mean Burst Duration [ms]
9. Mean Spikes in Burst
10. Mean ISI in Burst [ms]
11. Mean Spike Frequency in Burst [Hz]
12. Mean Interburst Interval [ms]
Hint: All parameters will be calculated, independently from the selected online burst parameters.
Extracting Timestamps only
If you are interested in the spike rate or spatial distribution of spikes but not in the waveform
information, you can extract only the detection events of spikes as single data points. This saves
computer performance and hard disk space.
Add the "Spike Sorter" and the "Spike Analyzer" to the virtual rack. Click "Analyzer" tab.
Select the check box “Timestamp”.