Multichannel Systems MC_Rack Manual - Manual (Page 132)

MC_Rack Manual
126
When recording with a MEA2100-System, the digital display is labeled: The first four rows display
the “DigIn” channels for bit 0 to bit 3. The next three rows show the “Blanking” signal 1 to 3 on
bit 4, bit 5, and bit 6. “Zero” is associated with bit 7. The following rows display the “RF” real-time
feedback associated to bit 8 to bit 16 on channel 1 to 8.
To record the digital stream, created via real-time feedback, please enable the respective check
box in the “Channels" tab.