Multichannel Systems MC_Rack Manual - Manual (Page 29)

Step by Step Tutorial
23
In MEA2100-System it is possible to configure two headstages independent of each other.
MC_Rack identifies two connected headstages as completely different devices. They are defined
via the character A or B in the serial number in the right "Data Source" drop down menu.
It is also possible to run two MC_Rack instances per headstage, for example for recording
from the 2x60 channels of the MEA2100-HS2x60 headstage separately. Please read chapter
"Advanced Configuration". Click the Amplifier drop down menus on the left side to configure
the "Amplifier". Additionally it is possible to configure the MEA layouts for up to two MEAs A
and B independent of each other. Click the MEA drop down menus on the right side.
MEA2100-32-System
The MEA2100-32-System is a descendant of the MEA2100-System with the same functions except
of the real-time feedback. Please read the MEA2100 Manual for detailed information. Select USB
from the left Data Source drop down list. The MEA2100-32 device will be specified on the right
Data Source drop down menu: MEA2100-32 (S/N: 00018-A). The number in brackets is the serial
number of the device. The data source layout is Configuration, with 32 electrode channels. It does
not matter whether you select the digital input channel or not.