Multichannel Systems MC_Rack Manual - Manual (Page 78)

MC_Rack Manual
72
Data Source Configuration
Click "Configuration".
Configuration is an option that can also be used with MC_Card data acquisition (64 or 128
channels), but is recommended for the USB based data acquisition systems USB-ME64 / USB-
ME/128 / USB-ME256. When selecting the configuration option, it is first necessary to adjust the
number of channels available. After that you can select the amplifier(s) and MEA(s) in use from
a drop down menu. To configure the MEA layout, please use the right drop down menu "MEA".
To configure the amplifier, please use the left drop down menu "Amp" (MEA1060 without
blanking circuit, gain factor 1200, and MEA1060BC with blanking circuit, gain factor 1100 for
MEA-Systems, and FA64I/S, FA32I/S for ME-Systems).