Xylem XL Series H-522 - Plus - Manual (Page 48)

5-2 Miscellaneous System Setup
XL™ Series
PC Menu Screen: System Setup Options.
System Setup (Esc to Return)
T - Time: HH:MM:SS
D - Date: MM/DD/YY
E - Date Fmt:MM/DD/YY
I - Site ID: Site_ID
A - Advanced Setup Options
M - SDI Sensor Mode Setup (See chapter 14)
L - SDI Logger Mode Setup (See Chapter 14)
P - Port Setup (See Chapter 6)
C - Configuration Files (See Chapter 7)
R - Reset Defaults (See Chapter 7)
G - Sync Time Options
F - Functions Menu (See Chapter 21)
B - XL-Basic Code Menu (See Chapter 22)
U - Update Firmware
Enter Option >
PC Interface View Built In Display Screen
T - Time: HH:MM:SS Time [HH:MM:SS]
This option is used to check or set the time clock used by the data logger. This is normally set to
local time or to international standard time. This is the time used to tag each scan placed in the
data file. This is a different time clock the one in the GOES radio. The GOES radio time clock
is normally set automatically by a GPS system and must be set to international standard time.
The display will be updated each second to allow easy viewing of the current time.
PC Interface View Built In Display Screen
D - Date: MM/DD/YY Date [MM/DD/YY]
This option is used to view or set the system date. The default format is MM/DD/YY, but it may
be changed using the date format option if needed.
PC Interface View Built In Display Screen
E - Date Fmt: MM/DD/YY Date [MM/DD/YY]
This option is used to set the date format. The default format is MM/DD/YY, but it may be
changed to other formats such as DD/MM/YY, YY/MM/DD, or DD/MM/YYYY. This format
will be used when the date is logged to the data file.