Xylem XL Series H-522 - Plus - Manual (Page 222)

20-6 Data card Options
XL™ Series
PC Interface View Built In Display Screen
Not Available Using PC Menu Copy .New To Card ->
This option allows the user to copy the .New file to the data card. Once the copy is complete, the
XL™ will prompt the user to erase the .New file, pressing enter will erase the .New file and
pressing cancel will not erase it. The use of the .New file is explained in the logging options
section of the manual.
PC Interface View Built In Display Screen
I - Erase Internal Data Erase All Int Data?
This option will cause all the internal data to be erased and the memory space freed up for new
data. Make sure the data has been retrieved one way or another before the data is erased. Note;
once erased the data cannot be retrieved. This option cannot be used while scanning is enabled.
The message "Not With Scanning On" will be displayed if the user tries to erase the internal data
while scanning is turned on.
PC Interface View Built In Display Screen
I - Erase Data Card Erase All Card Data?
This option will cause all the data on the external card to be erased and the memory space freed
up for new data. Make sure the data on the card is no longer needed before the data is erased.
Once erased the data cannot be retrieved. The external data card can be erased while scanning is
turned on.
PC Interface View Built In Display Screen
F - Erase Individual Files Erase Int Data File?
This option works a little differently when using the built in menu verses the PC menu interface.
Using the built in menu, pressing the ENTER key will cause a list of internal files to be viewed
starting with the first file on the internal card. To view the other files press the UP and DOWN
keys to scroll through the files. When a file is displayed the is to be erased, press the ENTER key