HP B6960-90078 - Manual (Page 90)

Configuring and Using Backup Devices
Shared Devices in the SAN Environment
Chapter 2 60
Static Drives The drives can still be used in the standard way using the static
hostname and the local device file. (You can use the local HP-UX or ATS
device file.) The local drives should be configured on the node. For
example:
The previous examples for floating and static drives show the device
identified by
/dev/rmt/0m and /dev/rmt/st3m . Both device files refer to
the same physical devices, and therefore the lock name ( Lib1_Drive_1 )
is identical.
Lock Name Libl_Drive_1
Table 2-3 How to Configure a Floating Drive
Table 2-4 How to Configure a Static Drive
Hostname Host_A
Device Control Path /dev/rmt/0m
Lock Name Lib1_Drive_1