HP B6960-90078 - Manual (Page 727)

ADIC/GRAU DAS and STK ACS Libraries
Troubleshooting Library Installation and Configuration
Chapter 14 697
Troubleshooting Library Installation and
Configuration
Installation Steps 1. Install the DAS Media Agent on the system controlling the GRAU
robotics (PC/robot).
2. Install the DAS Media Agent on the NT PCs where a drive is
connected (PC/drive).
3. Copy aci.dll + winrpc.dll + ezrpcw32.dll to winnt\system32
and \bin directory.
4. Create aci directory on PC/robot.
5. Copy dasadmin.exe to this directory.
6. Copy portmapper and portinst to aci directory.
7. Start portinst to install portmapper (only on PC/robot).
8. Install mmd patch on the CM.
9. The PC needs to be rebooted; then open Windows Control Panel . Go
to Services (Windows NT) or Administrative Tools, Services
(other Windows systems) and check if portmapper and both rpc
services are running.
10. Go to the OS/2 PC within the GRAU library, edit the
/das/etc/config file:
cd /das/etc/
execute: "e config"
Within this config file you need to add a client called
DATA_PROTECTOR containing the IP address of the PC/robot.
11. Execute the following commands from PC/robot:
dasadmin listd
dasadmin all DLT7000 UP
dasadmin mount (then you need to push the UNLOAD button
on the drive)
dasadmin dismount