HP B6960-90078 - Manual (Page 761)

Further Information
Example of the Package Configuration File
Appendix A A-31
# execution of each script.
# Note: The HALT_SCRIPT_TIMEOUT should be greater than the sum
of
# all SERVICE_HALT_TIMEOUT specified for all services.
RUN_SCRIPT /etc/cmcluster/ob2cl/ob2cl.cntl
RUN_SCRIPT_TIMEOUT NO_TIMEOUT
HALT_SCRIPT /etc/cmcluster/ob2cl/ob2cl.cntl
HALT_SCRIPT_TIMEOUT NO_TIMEOUT
# Enter the SERVICE_NAME, the SERVICE_FAIL_FAST_ENABLED and the
# SERVICE_HALT_TIMEOUT values for this package. Repeat these
# three lines as necessary for additional service names. All
# service names MUST correspond to the service names used by
# cmrunserv and cmhaltserv commands in the run and halt
scripts.
#
# The value for SERVICE_FAIL_FAST_ENABLED can be either YES or
# NO. If set to YES, in the event of a service failure, the
# cluster software will halt the node on which the service is
# running. If SERVICE_FAIL_FAST_ENABLED is not specified, the
# default will be NO.
#
# SERVICE_HALT_TIMEOUT is represented in the number of seconds.
# This timeout is used to determine the length of time (in
# seconds) the cluster software will wait for the service to
# halt before a SIGKILL signal is sent to force the termination
# of the service. In the event of a service halt, the cluster
# software will first send a SIGTERM signal to terminate the
# service. If the service does not halt, after waiting for the