HP B6960-90078 User Manual
Page 87
Configuring and Using Backup Devices
Shared Devices in the SAN Environment
Chapter 2
57
•
is the control path to the library robotic
driver on this client host.
•
is the name of the device definition used on this client
host.
You need one line per device for which you request direct access.
The
libtab
file is located on:
•
on Windows systems
•
/opt/omni/.libtab
on HP-UX and Solaris systems
•
/usr/omni/.libtab
on other UNIX systems
Example files follow for all systems involved. Definitions are separated
by blank lines, which are ignored. Since the default library robotics are
defined on the host
dupin.company.com
, no
libtab
file is needed on this
system.
TIP
It is possible to have only one
libtab
file that includes definitions for all
systems involved and is distributed to all such systems. In this case,
when a specific system needs “direct access” to the library robotic, the
definitions for other systems are ignored and only the definitions for the
system are used.
Example
libtab
file on zala
Example of the
libtab
file on host zala.company.com (Windows):
zala.company.com scsi:2:0:2:0 SAN_LIB_1_zala
zala.company.com scsi:2:0:2:0 SAN_LIB_2_zala
zala.company.com scsi:2:0:2:0 SAN_LIB_3_zala
zala.company.com scsi:2:0:2:0 SAN_LIB_4_zala
Example
libtab
file on oda
Example of the
libtab
file on host oda.company.com (HP-UX):
oda.company.com /dev/spt/lib SAN_LIB_1_computer_2
oda.company.com /dev/spt/lib SAN_LIB_2_computer_2
oda.company.com /dev/spt/lib SAN_LIB_3_computer_2
oda.company.com /dev/spt/lib SAN_LIB_4_computer_2