HP B6960-90078 - Manual (Page 692)

ADIC/GRAU DAS and STK ACS Libraries
The ADIC/GRAU DAS Library Device
Chapter 14 662
The ADIC/GRAU DAS Library Device
Data Protector provides full support for the ADIC/GRAU DAS Library
Systems. This section describes how you install and configure
ADIC/GRAU DAS library devices for direct and indirect library access.
Direct Access to the Library: Installation and
Configuration
This section focuses on the direct access configuration. The section is
structured in the following order:
• Initial steps you have to complete to prepare for installation
• How to install the DAS Media Agent software on Windows, HP-UX,
and AIX platforms
• Configuring the ADIC/GRAU library using the Data Protector GUI
• Configuring drives using the Data Protector GUI
• Accessing the ADIC/GRAU library using the Data Protector GUI
Connecting Library Drives
Physically connect the library drives and robotics to the systems where
you intend to install the DAS Media Agent software.
See http://www.openview.hp.com/products/datapro/spec_0001.html for
details about supported ADIC/GRAU libraries.
See “Installing the HP-UX Client System” in the HP OpenView Storage
Data Protector Installation and Licensing Guide for information on how
to physically attach a backup device to a UNIX system.
See “Installing the Windows Client System” in the HP OpenView Storage
Data Protector Installation and Licensing Guide for information on how
to physically attach a backup device to a Windows system.
Preparing for Installation
The following steps pertain to configuring the ADIC/GRAU library, and
should be completed before you install the DAS Media Agent software: