HP B6960-90078 - Manual (Page 660)

Integrations with Other Applications
MC/ServiceGuard Integration
Chapter 13 630
2. Create a logical volume for that group (for example,
/dev/vg_ob2cm/lv_ob2cm ), with the following steps:
a. Create a new logical volume:
lvcreate -L 100 -n lv_ob2cm /dev/vg_ob2cm
The number 100 presents the size of the partition in MB. The
etc/opt/omni and var/opt/omni Data Protector directories will
be located there.
b. Create a journaled filesystem on the logical volume:
newfs -F vxfs /dev/vg_ob2cm/rlv_ob2cm
NOTE If you want to mirror the new logical volume, refer to the HP-UX LVM
documentation on the configuration steps.
3. Set volume group properties according to the cluster documentation,
with the following steps:
a. Deactivate the volume group from regular mode:
vgchange -a n /dev/vg_ob2cm
b. Mark the volume group for the cluster use:
vgchange -c y /dev/vg_ob2cm
NOTE If this is a cluster lock disk and you are using a later version of
MC/ServiceGuard like 11.09, this is done automatically.
c. Use the volume group in the exclusive mode:
vgchange -a e /dev/vg_ob2cm
4. Mount the logical volume to a directory (for example, /omni_shared ),
with the following steps:
a. Create a mount point directory:
mkdir /omni_shared
b. Mount the filesystem to the mount point directory: