HP B6960-90078 - Manual (Page 772)

Further Information
Example of the Package Control File
Appendix A A-42
# 192.10.25.0 enter:
# IP[0]=192.10.25.12
# SUBNET[0]=192.10.25.0 # (netmask=255.255.255.0)
#
# Hint: Run "netstat -i" to see the available subnets in the
Network field.
#
# IP/Subnet address pairs for each IP address you want to add
to a subnet
# interface card. Must be set in pairs, even for IP addresses
on the same
# subnet.
#
IP[0]=10.17.3.230
SUBNET[0]=10.17.0.0
# SERVICE NAMES AND COMMANDS.
# Specify the service name, command, and restart parameters
which are
# used by this package. Uncomment SERVICE_NAME[0]="",
SERVICE_CMD[0]="",
# SERVICE_RESTART[0]="" and fill in the name of the first
service, command,
# and restart parameters. You must begin with SERVICE_NAME[0],
SERVICE_CMD[0],
# and SERVICE_RESTART[0] and increment the list in sequence.
#
# For example:
# SERVICE_NAME[0]=pkg1a
# SERVICE_CMD[0]="/usr/bin/X11/xclock -display
192.10.25.54:0"
# SERVICE_RESTART[0]="" # Will not restart the
service.