Avago Technologies LSI53C1010 - Manual (Page 292)

A-12 NASM Error Messages
STEST1 LSI53C720, LSI53C770,
and LSI53C8XX architectures
only The STEST1 register is only available on the LSI53C720 and
higher architectures.
STEST2 LSI53C720, LSI53C770,
and LSI53C8XX architectures
only The STEST2 register is only available on the LSI53C720 and
higher architectures.
STEST3 LSI53C720, LSI53C770,
and LSI53C8XX architectures
only The STEST3 register is only available on the LSI53C720 and
higher architectures.
STEST4 LSI53C895 architecture
only The STEST4 register is only available on the LSI53C895.
STIME0 LSI53C720, LSI53C770,
and LSI53C8XX architectures
only The STIME0 register is only available on the LSI53C720 and
higher architectures.
STIME1 LSI53C720, LSI53C770,
and LSI53C8XX architectures
only The STIME1 register is only available on the LSI53C720 and
higher architectures.
STORE: LSI53C810A,
LSI53C825A, LSI53C860,
LSI53C875, LSI53C876,
LSI53C885, and LSI53C895
architectures The STORE instruction is only supported by the LSI53C810A
and higher architectures.
STORE: Count must not exceed 4
bytes Four bytes is the maximum byte count to STORE.
SWIDE LSI53C720, LSI53C82X,
LSI53C875, LSI53C876,
LSI53C885, and LSI53C895
architectures only The SWIDE register is only available on the LSI Logic SCSI
processors that support wide SCSI.
TABLE directive not available on
LSI53C700 architecture Table indirect operations are not supported by the LSI53C700.
Table indirect operations not
available on LSI53C700
architecture Table indirect addressing is not supported by the LSI53C700
architecture.
Table name expected string The directive TABLE was found without a table name declaration.
Unexpected EOF End of file was found when not expected.
Table A.1 NASM Error Messages (Cont.)
Error Description