Avago Technologies LSI53C1010 - Manual (Page 120)

3-80 The SCSI SCRIPTS Processor Instruction Set
LOAD instruction. The data will be stored to the SCRATCHA register;
one, two, three, or four bytes may be stored.
The bottom portion of the illustration shows the second 32-bit word of the
instruction, defined by the
command_buffer. The Block Move instruction
begins transferring data from this address. It is loaded into the DSPS
register.
Figure 3.31 Load/Store Instruction
NASM
Output
Binary
Instruction
Format
1 1 0 0 0 1 0 0 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0
DCMD Register DBC Register
E2340004 00FFFE54
SCSI SCRIPTS
Source Code
STORE NoFlush SCRATCHA0,4, 0xFFFE54
0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 1 0 1 0 1 0 0 0 0 1
DSPS Register
Binary
Instruction
Format
0 0FFFE54
(command_buffer)
NASM
Output