Avago Technologies LSI53C1010 User Manual
Page 285

A-5
PHASE specified multiple times
Redeclaration of Label string
The string has previously been declared as a label or some other
type of identifier other than an ENTRY.
Redeclaration of TABLE identifier
The string has previously been declared as a TABLE name or
some other type of identifier. Only one TABLE declaration per
source file is allowed.
Register or Data24 value
expected string
String was found instead of a register or a 24-bit value.
Register right of operand must be
SFBR
In a Move to SFBR operation, SFBR must be to the right of the
operand.
Relative addressing not available
on LSI53C700 architecture
Relative addressing is not supported by the LSI53C700
architecture.
RESPID LSI53C81X architecture
only
The RESPID register is only one byte in the LSI53C810.
RESPID0 LSI53C720,
LSI53C770, LSI53C82X,
LSI53C875, LSI53C876,
LSI53C885, and LSI53C895
architectures only
The RESPID0 register is only available in devices that support
Wide SCSI.
RESPID1 LSI53C720,
LSI53C770, LSI53C82X,
LSI53C875, LSI53C876,
LSI53C885, and LSI53C895
architectures only
The RESPID1 register is only available in devices that support
Wide SCSI.
Right parenthesis expected string
String was found instead of a right parentheses.
SBDL LSI53C700, LSI53C710,
and LSI53C81X architectures
only
The SBDL register is only one byte in the LSI53C700,
LSI53C710, and LSI53C81X architectures.
SBDL0 LSI53C720, LSI53C770,
LSI53C82X, LSI53C875,
LSI53C876, LSI53C885, and
LSI53C895 architectures only
The SBDL register is two bytes in the devices that support Wide
SCSI.
SBDL1 LSI53C720, LSI53C770,
LSI53C82X, LSI53C875,
LSI53C876, LSI53C885, and
LSI53C895 architectures only
The SBDL register is two bytes in the devices that support Wide
SCSI.
Table A.1
NASM Error Messages (Cont.)
Error
Description