TA Triumph-Adler DC 2023 - Manual (Page 64)

2-16
Section 2 Various Functions of this Fax
1. When a call comes in, the separately purchased phone will ring.
3A180100A
3A1/FaxSystem(A)/MCE-Eng
/ 164
Manual Fax Reception
Once you are connected with the other party, reception can be
initiated manually by pressing the Start key.
Use this mode when you want to talk to the other party prior to
actual reception of the documents. * Manual Fax Reception is only possible if a separately
purchased telephone is connected to this fax machine.
* Auto Fax Reception is the default setting in this fax, so,
in order to manually initiate reception, it is usually necessary to
change the reception mode to Manual Fax Reception.
3. Check whether or not the call is from a fax.
> If you hear a fax tone…
You are connected to a fax machine.
Press the Start key. Fax reception will begin.
> If the other party’s voice can be heard…
You are connected to a telephone.
Press the Start key at the end of the conversation to initiate
reception. Fax reception will begin.
4. Hang up the receiver once the reception begins.
2. Pick up the telephone receiver. ● Preparation
* Raise both cover plates and press the MANUAL RX. key to switch
the fax to the Manual Fax Reception mode.
* The MANUAL RX. indicator will be lit when the fax is in the Manual
Fax Reception mode.
(You can switch the fax back to the Auto Fax Reception mode at
any time by simply pressing the MANUAL RX. key again until the
MANUAL RX. indicator goes out.)
02/VariousF/3A1/MCE/Eng.q 23-12-1999 13:31 Page 2-16