TA Triumph-Adler DC 2023 - Manual (Page 102)

2. Use the cursor up or the cursor down key to select “Program
group key”.
4-30
Section 4 Other Features of this Fax
(1) Registering
* You can designate any number of the 80 one-touch keys as group
dial key.
* If you enter all of the fax numbers using abbreviated numbers or
one-touch keys, this fax can automatically dial to up to 280 different
fax machines in a single operation.
* If you want to check the information already registered under each
group dial key, print out a Group Dial List.
* If you register a group name as well as the fax number of the other
parties under each group dial key, you will be able to use the
directory to search for their fax number.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Raise both cover plates and press the REGISTER key.
The “Program” menu will appear in the message display.
3A180100A
3A1/FaxSystem(A)/MCE-Eng
/ 164
3. Press the Enter key.
4. Press an unregistered one-touch key.
The group dial key will be registered under that one-touch key.
Group Dial Keys
If you register a multiple destinations under a one-touch key in
advance, that key will then function as a group dial key and you
will be able to dial all those number with the touch of a key. * You can use group dial keys not only for standard
transmission, but also for such operations as Broadcast
Transmission and Polling Reception.
* You CANNOT use group dial keys in combination with chain
dial keys.
Program:
End
➪ Program abbreviated dial
Program one-touch key
Program:
Program one-touch key
Program program key
➪ Program group key
Group:
Press one-touch key
5. Enter the desired group name.
* The group name can be up to 20 characters in length.
(Refer to “Entering characters”, page 1-28.)
* If you DO NOT wish to enter a group name, proceed to step 6.
6. Press the Enter key.
M.K.G.
Enter group name
Enter group name
v :
Enter fax number
01-DEC-1999 12:00
Set original
04/OtherF-3/3A1/MCE/Eng.q 23-12-1999 14:01 Page 4-30