TA Triumph-Adler DC 2116 User Manual
TA Triumph-Adler Copiers
Table of contents
Document Outline
- Trademark Information
- About this Operation Guide
- Using the Operation Guide
(On-Line Manual) - Opening the On-Line Manual
- Important:
- Getting connected
- Table of contents
- 1 Preparations
- 2 Set-up
- 3 Performing the Required Operation at the Scanner
- When selecting a destination (receiver) from the common address book:
- Scanning with TWAIN
- Scan setting
- A Auto Exposure key - Press this key to select the automatic exposure setting.
- B Image concentration adjustment key - Press these keys to select an exposure level.
- C Auto%/100% key - Press this key when you enable automatic paper orientation selection depending on the original in the gray scale mode.
- D Original Image Type key - Press this key to select the original image type.
- E Original Size key - Press this key to specify the original size.
- F Paper Select key - Press this key to specify the transmission (image) size. The scanned original image will be automatically reduced or enlarged to the specified size.
- G Scanner Function key - The following settings can be adjusted.
- H Enter (OK) key - Press this key to confirm the setting in various setting screens.
- I Start key - Press this key to start scanning.
- J Stop/Clear key - Press this key to stop scanning, clear an entered value or return to the previous screen.
- K Scanner key - If you select this key to cancel scan setting, the scan setting screen will appear.
- When selecting a destination (receiver) from the private address book:
- When storing data in the PC of the transmitter (user):
- Scanning under the Scan to PC and Send E-mail functions
- When selecting a destination (receiver) from the common address book: