TA Triumph-Adler DC 2023 - Manual (Page 100)

4-28
Section 4 Other Features of this Fax
9. Press the Enter key.
10. If necessary, enter the predetermined F-Code password.
* The password can be up to 20 digits in length and can include
any combination of the numerals 0 - 9 and the symbols “ ” and
“#”. You do not have to enter an F-Code password here if you
agree in advance with the destination party not to use one.
* If you DO NOT need to enter an F-Code password, proceed to
step 11.
11. Press the Enter key.
* If there is some problem with the information that you entered,
an error message will appear in the message display.
In this case, press the Enter key and the message display will
return to a display that allows you to enter the destination fax
number again.
12. Use the cursor up or the cursor down key to select whether or
not you want the received documents to be printed out at this fax
machine.
* The asterisk (*) in the message display indicates the current
setting.
* If you want to have the documents printed out at this fax,
select “On”.
13. Press the Enter key.
14. Use the cursor up or the cursor down key to select whether or
not you want to designate a time for the Fax Forwarding
operation to begin and end.
* If you want to have only those documents received during
designated hours forwarded to another fax number, select
“Delayed TX”. If you want to have Fax Forwarding continue
indefinitely, select “All day”.
* The asterisk (*) in the message display indicates the current
setting.
> If you selected “Delayed TX”, proceed to step 15.
> If you selected “All day”, proceed to step 19.
3A180100A
3A1/FaxSystem(A)/MCE-Eng
/ 164
Fax forw. time:
➪
*Delayed TX
All day
15. Press the Enter key.
16. Enter the desired time for Fax Forwarding to begin.
* If you want to reset the displayed time to “00:00”, simply press
the Stop/Clear key.
17. Press the Enter key.
18. Enter the desired time for Fax Forwarding to end.
* If you want to reset the displayed time to “00:00”, simply press
the Stop/Clear key.
19. Press the Enter key. Registration for Fax Forwarding is complete.
20. Press the Reset key.
The operation panel will return to the initial mode settings.
Program fax parameter:
Permit tel nr P
Permit number
P
➪ Fax forwarding P
Password:
20 digits
Enter your password
Password:
3856
20 digits
Enter your password
Print here:
➪
On
Off
Fax forward start time:09:00
Program start time
Fax forward stop time:00:00
Program stop time
Fax forward stop time:17:00
Program stop time
Fax forward start time:00:00
Program start time
04/OtherF-2/3A1/MCE/Eng.q 23-12-1999 13:54 Page 4-28