TA Triumph-Adler DC 2023 - Manual (Page 120)

4-48
Section 4 Other Features of this Fax
(3) Registering Permit ID Numbers
* You can register up to 5 numbers as Permit IDs in this fax.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Raise both cover plates and press the REGISTER key.
The “Program” menu will appear in the message display.
2. Use the cursor up or the cursor down key to select “Program fax
parameter”.
3. Press the Enter key.
4. Use the cursor up or the cursor down key to select “Permit number”.
5. Press the Enter key.
6. Use the cursor up or the cursor down key to select an
unregistered number from among #1 - #5.
7. Press the Enter key.
8. Use the keypad to enter the desired Permit ID Number.
* Each Permit ID is a 4-digit number that can include any
combination of the numerals 0 - 9.
9. Press the Enter key. Registration of that Permit ID Number is
complete.
> If you want to continue registering other Permit ID Numbers,
repeat steps 6 - 9.
> If you are finished registering Permit ID Numbers, press the
Reset key. The operation panel will return to the initial mode
settings.
3A180100A
3A1/FaxSystem(A)/MCE-Eng
/ 164
Program:
End
➪
Program abbreviated dial
Program one-touch key
Program fax parameter:
End
➪ v :
Own name :
Program fax parameter:
Own ID :
Permit tel nr
P
➪ Permit number P
Permit number:
#1:1010
#2:
➪ #3:
#3:0000
Program permit number
Permit number:
#1:1010
#2:
➪ #3:3333
Permit number:
End
➪ #1:1010
#2:
#3:3333
Program permit number
Program:
Subaddress box register
Program encryption code
➪ Program fax parameter
P
01-DEC-1999 12:00
Set original
04/OtherF-4/3A1/MCE/Eng.q 23-12-1999 14:43 Page 4-48