TA Triumph-Adler DC 2023 - Manual (Page 43)

3A180100A
3A1/FaxSystem(A)/MCE-Eng
/ 164
1-35
Section 1 Basic Use of this Fax
Press the Enter key.
Designating the abbreviated number for F-Code
Based Communication
> If you want to designate this abbreviated number for F-Code
Based Communication, press the SUBADDRESS key and
then proceed to step 8.
> If you DO NOT want to designate this abbreviated number
for F-Code Based Communication, proceed to step 11.
Entering a subaddress
Use the keypad to enter the corresponding subaddress.
* A subaddress is required during F-Code Based Communication
in order to designate the other party’s F-Code Box.
The subaddress can be up to 20 digits in length and can
include any combination of the numerals 0 - 9.
77
88
99
Entering an F-Code password
An F-Code password is used during F-Code Based
Communication. However, you do not have to enter an
F-Code password here if you determine in advance with the
other party not to use one.
> If you want to register an F-Code password, it can be up to
20 digits in length and can include any combination of the
numerals 0 - 9 and the symbols “
” and “#”.
> If you DO NOT want to register an F-Code password,
proceed to step 11.
1100
Press the Enter key.
Entering the other party’s name
Enter the name of the other party.
* The name of the other party can be up to 20 characters in
length. (Refer to “Entering Characters”, page 1-28.)
Press the Enter key.
Selecting the transmission speed
Use the cursor up or the cursor down key to select the desired
transmission speed.
* If communication errors occur frequently at “33600bps”,
change the setting to “14400bps” or “9600bps”.
However, in this case, transmission time will be increased.
Designating the abbreviated number for Encrypted
Transmission
Use the cursor up or the cursor down key to select whether or
not you want to designate this abbreviated number for
Encrypted Transmission.
> If you want to designate this abbreviated number for
Encrypted Transmission, select “On” and proceed to step 17
on page 1-36.
> If you DO NOT want to designate this abbreviated number
for Encrypted Transmission, select “Off” and proceed to
step 21 on page 1-36. 1111
1122
1133
1144
1155
> If you pressed the SUBADDRESS key in step 7, proceed to
step 21 on page 1-36.
> If you DID NOT press the SUBADDRESS key in step 7,
press the Enter key and proceed to step 16.
1166
Subaddress:
20 digits
Enter subaddress numbers
Subaddress:
66385
20 digits
Enter subaddress numbers
Password:
20 digits
Enter your password
Enter destination name
M.K.W
Enter destination name
TX start speed:
➪ 33600bps
14400bps
9600bps
TX start speed:
33600bps
➪ 14400bps
9600bps
Encryption:
➪ On
Off
01/Basic-2/3A1/MCE/Eng.q 23-12-1999 13:24 Page 1-35