TA Triumph-Adler DC 2023 - Manual (Page 55)

2-7
Section 2 Various Functions of this Fax
(1) Registering
* You can register any number of the 80 one-touch keys for use as
chain dial keys.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode
settings.
1. Raise both cover plates and press the REGISTER key.
The “Program” menu will appear in the message display.
2. Use the cursor up or the cursor down key to select
“Program chain dial”.
3. Press the Enter key.
3A180100A
3A1/FaxSystem(A)/MCE-Eng
/ 164
Chain Dial Keys
If you register a chain dial number under a one-touch key in
advance, that one-touch key will function as a chain dial key and
the chain dial key can be used to enter the initial portion of the
other party’s fax number. * You can only use chain dial keys once in a dialling sequence:
to enter the initial digits of the other party’s fax number.
* You can use chain dial keys when entering destination fax
numbers in each of the various types of fax communication
available in this fax such as Broadcast Transmission.
* You CANNOT use chain dial keys in combination with group
dial keys.
Program:
Program program key
Program group key
➪
Program chain dial
Chain:
Press one-touch key
4. Press an unregistered one-touch key.
5. Use the keypad to enter the desired chain dial number.
* The chain dial number can be up to 32 digits in length.
6. Press the Enter key.
7. Enter the desired name for the chain dial key.
* The name for the chain dial key can be up to 20 characters in
length. (Refer to “Entering characters”, page 1-28.)
8. Press the Enter key.
Registration of that chain dial key is complete.
> If you want to continue registering other chain dial keys, repeat
steps 4 - 8.
> If you are finished registering chain dial keys, press the Reset
key. The operation panel will return to the initial mode settings.
v :0777
Enter fax number
Enter chain dial name
DDL-Chicago
(Small letter mode)
Enter chain dial name
v :
Enter fax number
Program:
End
➪
Program abbreviated dial
Program one-touch key
01-DEC-1999 12:00
Set original
02/VariousF/3A1/MCE/Eng.q 23-12-1999 13:31 Page 2-7