TA Triumph-Adler DC 2023 - Manual (Page 17)

1-9
Section 1 Basic Use of this Fax
1 Registering your fax number
* Use the following procedure as well when you want to
change information that is already registered.
* If you want to cancel the procedure part way through,
press the Reset key. The operation panel will return to the
initial mode settings.
3A180100A
3A1/FaxSystem(A)/MCE-Eng
/ 164
Checking the initial mode display
Check the message display to make sure that the operation
panel is in the initial mode for fax operation.
(Refer to “(2) Initial Mode”, page 1-12.)
* If the fax is not in the Fax Operation mode, press the FAX
key to light the lamp in that key.
Entering the “Program” mode
Raise both cover plates that are located over the one-touch
keys and press the REGISTER key.
The “Program” menu will appear in the message display.
Scroll through the menu with the cursor up or the cursor down
key and select “Program fax parameter”.
Press the Enter key. The “Program fax parameter” menu will
appear in the message display.
Press the Enter key again.
Entering your fax number
Use the keypad to enter your fax number.
* The fax number can be up to 20 digits in length.
* If you want to clear the currently displayed number from the
message display, simply press the Stop/Clear key.
Press the Enter key.
Registration of your fax number is complete.
* To return to the initial mode settings, press the Reset key.
(4) Registering Your Self-Station Information
If you register information identifying your station (fax number,
station name and station ID) here, it can be sent to the receiving
party’s fax and printed on the received documents, thereby instantly
notifying that party of the source of the fax transmission.
11
22
33
44
55
66
77
Program:
End
➪ Program abbreviated dial
Program one-touch key
Program:
Subaddress box register
Program encryption code
➪
Program fax parameter
P
Program fax parameter:
End
➪ v :
Own name :
v :_
20 digits
Enter fax number
v :684256_
20 digits
Enter fax number
Program fax parameter:
End
➪ v :684256
Own name :
01-DEC-1999 12:00
Set original
01/Basic-1/3A1/MCE/Eng.q 23-12-1999 13:08 Page 1-9