TA Triumph-Adler DC 2023 - Manual (Page 150)

7-2
Section 7 Optional Equipment
Duplex Unit
By installing the optional Duplex Unit, Duplex Reception – in which
paper is turned over inside the fax machine and printing
accomplished on the back side – will be possible.
When the width of each page received is exactly the same, the
documents will be printed onto the front and back sides of that size
of paper.
* To use the Duplex Reception function, it is necessary to turn it ON
in advance.
* When the Duplex Reception function is turned ON, all pages of a
fax reception will be temporarily stored in memory – regardless of
the reception mode setting – and they will then be printed out at
one time.
● Turning Duplex Reception ON/OFF
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Press the CONFIGURE key.
2. Use the cursor up or the cursor down key to select “2-sided RX”.
3. Press the Enter key.
4. Use the cursor up or the cursor down key to select whether to turn
Duplex Reception ON or OFF.
* The asterisk (*) in the message display indicates the current
setting.
5. Press the Enter key. The setting for Duplex Reception is complete.
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings.
Adding Bitmap Memory
By adding 4 MB of optional Bitmap Memory, you will be able to
transmit and receive documents using the ULTRA FINE resolution.
To select the ULTRA FINE resolution, press the resolution select key
to light the ULTRA FINE resolution indicator.
Adding Imaging Memory
By adding either 2 MB or 4 MB of optional Imaging Memory, you will
be able to store more documents into memory (for transmission or
through reception).
* Refer to the Instruction Handbook for your copier
for information on other optional equipment.
3A180100A
3A1/FaxSystem(A)/MCE-Eng
/ 164
Set fax:
Paper feed sel:Auto sel.
2-up RX :Off
➪ 2-sided RX :Off
2-sided RX:
➪ On
*Off
Set fax:
Paper feed sel:Auto sel.
2-up RX :Off
➪ 2-sided RX :On
Set fax:
End
➪
TTI :Outside p.
Print report
P
07/Options/3A1/MCE/Eng.q 23-12-1999 14:34 Page 7-2