TA Triumph-Adler DC 2023 - Manual (Page 56)

2-8
Section 2 Various Functions of this Fax
(2) Modifying and Deleting
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Perform steps 1 - 3 of “(1) Registering”, page 2-7.
2. Press the one-touch key (chain dial key) containing the chain dial
information you want to modify or delete.
3. Perform the following procedure that corresponds to what you
want to do:
> Modifying registered information
Use the cursor up or the cursor down key to select the information
you want to modify. Then press the Enter key.
* Follow the steps related to the desired information in
“(1) Registering”, page 2-7, to change that information.
> Deleting the chain dial key
1 Press the Stop/Clear key.
* If you want to cancel the deletion procedure, simply press the
Stop/Clear key again.
2 Press the Enter key.
4. If you are finished modifying and/or deleting chain dial keys,
press the Reset key. The operation panel will return to the initial
mode settings.
3A180100A
3A1/FaxSystem(A)/MCE-Eng
/ 164
(3) Using a Chain Dial Key
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. If the operation involves the transmission of documents, set the
documents you want to transmit.
2. Press the desired one-touch key that was registered as a chain
dial key.
3. Enter the other party’s fax number.
* You can enter the fax number using the keypad, abbreviated
numbers, one-touch keys or the directory.
* Once the other party’s fax number is entered, the displayed
chain dial number or name will be replaced in the message
display by the other party’s fax number or name.
* If you want to enter the fax number once again from the
beginning, simply press the Stop/Clear key.
4. Press the Start key.
The communication operation will begin automatically.
Chain:
Press one-touch key
Chain:05
End
v :0777
➪
DDL-Chicago
Chain:05
Deleted
Chain:05
Press ENTER key.
Delete
01-DEC-1999 12:00
Set original
01-DEC-1999 12:00
Set original
01-DEC-1999 12:00
Document :A4
Enter destination
v :DDL-Chicago
Document :A4
Enter destination
v :02468
Document :A4
Press START-key
02/VariousF/3A1/MCE/Eng.q 23-12-1999 13:31 Page 2-8