TA Triumph-Adler DC 2023 - Manual (Page 105)

4-33
Section 4 Other Features of this Fax
(3) Dialling
* You CANNOT use group dial keys in combination with chain dial keys.
* You can use group dial keys not only for standard transmission, but
also for such operations as Broadcast Transmission and Polling
Reception.
1. If the operation involves the transmission of documents, set the
documents you want to transmit.
2. Press the desired one-touch key that was registered as a group
dial key.
3A180100A
3A1/FaxSystem(A)/MCE-Eng
/ 164
* The fax will perform the appropriate procedure to all the fax
numbers registered under that group key.
* If “Press X -key” appears in the bottom line of the message display,
Dial Confirmation is turned ON. In this case, check that the group
displayed is actually the one desired.
> If the group IS the one desired, press the key on the keypad that
corresponds to the number indicated in the message display.
The operation will begin automatically.
> If the group is NOT the one desired, press the Reset key.
The operation panel will return to the initial mode settings.
(4) Printing Out a Group Dial List
Print out this list in order to check the contents of group dial keys
currently registered in this fax, such as the registered fax numbers
and the group name.
* If there are no group dial keys registered in this fax, a Group Dial
List will not be printed out.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Raise both cover plates and press the PRINT REPORTS key.
The “Print report” menu will appear in the message display.
2. Use the cursor up or the cursor down key to select “Speed-dial list”.
3. Press the Enter key.
4. Use the cursor up or the cursor down key to select “Group dial list”.
5. Press the Enter key. A Group Dial List will be printed out.
* The operation panel will return to the initial mode settings.
* If there are no group dial keys registered in the fax, an error
message will appear in the message display and then the
operation panel will return to the initial mode settings.
Print report:
➪
Activity report
Confirmation report
User setting list
Print report:
User setting list
Confidential box list
➪
Speed-dial list
P
Print speed-dial list:
➪ Abbreviated dial list
One-touch key list
Telephone directory list
Print speed-dial list:
Telephone directory list
Program dial list
➪ Group dial list
01-DEC-1999 12:00
Set original
01-DEC-1999 12:00
Set original
01-DEC-1999 12:00
Document :A4
Enter destination
v :M.K.G.
Document :A4
Press 5-key
04/OtherF-3/3A1/MCE/Eng.q 23-12-1999 14:01 Page 4-33