2) modifying and deleting permit telephone numbers – TA Triumph-Adler DC 2023 User Manual
Page 119

4-47
Section 4 Other Features of this Fax
4. Use the cursor up or the cursor down key to select “Permit tel nr”.
5. Press the Enter key.
6. Use the cursor up or the cursor down key to select an
unregistered number from among #1 - #5.
7. Press the Enter key.
8. Use the keypad to enter the desired Permit Telephone Number.
* Each Permit Telephone Number can be up to 20 digits in length
and can include any combination of the numerals 0 - 9.
9. Press the Enter key.
Registration of that Permit Telephone Number is complete.
> If you want to continue registering other Permit Telephone
Numbers, repeat steps 6 - 9.
> If you are finished registering Permit Telephone Numbers,
press the Reset key. The operation panel will return to the initial
mode settings.
(2) Modifying and Deleting Permit
Telephone Numbers
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Perform steps 1 - 5 of “(1) Registering Permit Telephone
2. Use the cursor up or the cursor down key to select the Permit
Telephone Number to be modified or deleted.
3. Perform the following modification or deletion procedure.
> Modifying registered information
1
Press the Enter key.
* Press the Stop/Clear key to clear the currently displayed
number from the message display.
2
Use the keypad to enter the new Permit Telephone Number to
be registered.
* Each Permit Telephone Number can be up to 20 digits in
length and can include any combination of the numerals 0 - 9.
3
Press the Enter key.
> Deleting the Permit Telephone Number
Press the Stop/Clear key. The selected Permit Telephone Number
will be deleted.
4. If you are finished modifying and/or deleting Permit Telephone
Numbers, press the Reset key. The operation panel will return to
the initial mode settings.
* If you want to continue modifying and/or deleting other Permit
Telephone Numbers, return to step 2.
3A180100A
3A1/FaxSystem(A)/MCE-Eng
/ 164
Program fax parameter:
Own name :
Own ID :0000
➪
Permit tel nr
P
Permit tel nr:
End
➪
#1:1111
#2:
Permit tel nr:
#1:1111
#2:
➪
#3:
#3:
20 digits
Program permit tel. number
#3:0003
20 digits
Program permit tel. number
Permit tel nr:
#1:1111
#2:
➪
#3:0003
Permit tel nr:
End
➪
#1:1111
#2:
Permit tel nr:
#1:1111
#2:
➪
#3:0003
#3:0003
20 digits
Program permit tel. number
#3:3333
20 digits
Program permit tel. number
Permit tel nr:
#1:1111
#2:
➪
#3:
04/OtherF-4/3A1/MCE/Eng.q 23-12-1999 14:43 Page 4-47