TA Triumph-Adler DC 2023 - Manual (Page 15)

3A180100A
3A1/FaxSystem(A)/MCE-Eng
/ 164
1-7
Section 1 Basic Use of this Fax
(2) Turning TTI Transmission ON/OFF
The TTI (Transmit Terminal Identifier) refers to information – such as
the time of the transmission, the number of pages, your station name
and fax number, etc. – that is automatically sent to the receiving
party’s fax and printed out on the received documents. With this fax,
the user can select here whether or not that TTI information will be
sent to the receiving party’s fax, and – if it is – whether it will be
printed inside or outside the border of the transmitted page.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
Checking the initial mode display
Check the message display to make sure that the operation
panel is in the initial mode for fax operation.
(Refer to “(2) Initial Mode”, page 1-12.)
* If the fax is not in the Fax Operation mode, press the FAX
key to light the lamp in that key.
Press the Enter key.
* The asterisk (*) in the message display indicates the current
setting.
Selecting transmission and location
of the TTI information
Use the cursor up or the cursor down key to select whether or
not you want the TTI information to be sent and, if so, the
location where it will be printed.
* If you selected “Outside page”, the TTI information will be
printed outside the border of the transmitted page.
Press the Enter key.
The setting for TTI Transmission is complete.
* To return to the initial mode settings, use the cursor up or the
cursor down key to select “End”. Then press the Enter key.
Raising both cover plates
Raise both cover plates that are located over the one-touch
keys on the right side of the operation panel.
Entering the “Set fax” mode
Press the CONFIGURE key.
The “Set fax” menu will appear in the message display.
Use the cursor up or the cursor down key to select “TTI”.
11
22
33
44
55
66
77
Set fax:
End
➪ TTI :Outside p.
Print report
P
Set fax:
End
➪ TTI :Outside p.
Print report
P
TTI:
➪ *Outside page
Inside page
Do not print
TTI:
*Outside page
➪ Inside page
Do not print
Set fax:
End
➪ TTI :Inside p.
Print report
P
30-NOV-1999 10:00
Set original
01/Basic-1/3A1/MCE/Eng.q 23-12-1999 13:08 Page 1-7