TA Triumph-Adler DC 2023 - Manual (Page 129)

3A180100A
3A1/FaxSystem(A)/MCE-Eng
/ 164
4-57
Section 4 Other Features of this Fax
3. Press the Enter key.
4. Use the cursor up or the cursor down key to select “Access code”.
5. Press the Enter key.
6. Use the keypad to enter the currently registered management
password (4 digits).
* If you enter the wrong password, an error message will be
displayed. In this case, press the Enter key and enter the correct
password.
7. Use the cursor up or the cursor down key to select an
unregistered access code no. from among #01 - #50.
8. Press the Enter key.
9. Use the keypad to enter the desired access code.
* Each access code is a 4-digit number that can include any
combination of the numerals 0 - 9.
Program fax parameter:
Remote test ID:0000
Date and time :12:00
➪ Access code
P
Enter your password
Enter your password
Access code:
#01:
#02:
➪
#03:
#03:0000
Enter access code
#03:3363
Enter access code
Program fax parameter:
End
➪ v :
Own name :
10. Press the Enter key.
11. Enter the desired id-code name.
(Refer to “Entering characters”, page 1-28.)
* The id-code name can be up to 32 characters in length.
* Press the Stop/Clear key to clear the currently displayed name
from the message display.
12. Press the Enter key.
Registration of that access code is complete.
> If you want to continue registering other access codes, repeat
steps 7 - 12.
> If you are finished registering access codes, press the Reset
key. The operation panel will return to the initial mode settings.
#03:
ID-code name
#03:SKL-G
ID-code name
Access code:
#01:
#02:
➪ #03:3363:SKL-G
04/OtherF-4/3A1/MCE/Eng.q 23-12-1999 14:43 Page 4-57