TA Triumph-Adler DC 2023 - Manual (Page 104)

4-32
Section 4 Other Features of this Fax
(2) Modifying and Deleting
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Perform steps 1 - 3 of “(1) Registering”, page 4-30.
2. Press the one-touch key (group dial key) containing the
information you want to modify or delete.
3. Perform the following procedure that corresponds to what you
want to do:
> Modifying the group name
1 Use the cursor up or the cursor down key to select the group
name to be modified.
2 Press the Enter key.
3 Refer to “Entering Characters”, page 1-28, and change the
group name to that desired. Then press the Enter key.
> Adding a fax number
1 Use the cursor up or the cursor down key to select “Group dial
list”.
2 Press the Enter key.
3 Use the cursor up or the cursor down key to select “Add”.
Then press the Enter key.
4 Refer to “(1) Registering”, page 4-30, and add the new
destination fax number.
3A180100A
3A1/FaxSystem(A)/MCE-Eng
/ 164
Group:
Press one-touch key
Group:04
End
➪
M.K.G.
Group dial list P
Group:04
End
➪ M.K.G.
Group dial list
P
Group dial list:
End
➪ Add
Change/Delete
Group:04
End
M.K.G.
➪ Group dial list
P
> Modifying or deleting a fax number
1 Use the cursor up or the cursor down key to select “Group dial
list”.
2 Press the Enter key.
3 Use the cursor up or the cursor down key to select
“Change/Delete”. Press the Enter key.
4 Use the cursor up or the cursor down key to select the fax
number you want to modify or delete.
5 If you want to modify the fax number, press the Enter key and
then refer to “(1) Registering”, page 4-30, to change the
number as desired.
If you want to delete the fax number, press the Stop/Clear key.
The fax number will be deleted.
> Deleting the group dial key
1 Press the Stop/Clear key.
* If you want to cancel the deletion procedure, simply press the
Stop/Clear key again.
2 Press the Enter key. The group dial key will be deleted.
4. If you are finished modifying and/or deleting group dial keys,
press the Reset key.
The operation panel will return to the initial mode settings.
Group:04
End
M.K.G.
➪
Group dial list
P
Group dial list:
End
➪ Add
Change/Delete
Change/Delete group key:
End
➪ v :CRCD
v :09528
Change/Delete group key:
End
v :CRCD
➪ v :09528
Group:04
Press ENTER key.
Delete
Group:04
Deleted
01-DEC-1999 12:00
Set original
04/OtherF-3/3A1/MCE/Eng.q 23-12-1999 14:01 Page 4-32