Yaskawa Matrix Converter - Manual (Page 45)

Wiring Main Circuit Terminals
2-
11
‹ Standard Connection Diagrams
Standard MxC connection diagrams are shown in Fig 2.8. These are the same for both 200 V class and 400 V
class MxCs. The connections depend on the MxC capacity.
„ CIMR-ACA25P5 to 2045, 45P5 to 4160
* 1. Connect the Momentary Power Loss Compensation unit. Do not connect power to these terminals.
* 2. Normally not used. Do not connect power to these terminals.
* 3. The MxC models CIMR-ACA4110 and 4160 do not have terminals r2, s2, t2, p1 and n1.
Note: Control power is supplied internally from the main circuit power supply for all MxC models.
Fig 2.8 Main Circuit Terminal Connections
3-phase 200 VAC
(400 VAC)
U/T1
V/T2
W/T3
t2
* 2 *3
R/L1
S/L2
T/L3
r2
* 2 *3
s2
* 2 *3
IM
p1
* 1 *3
n1
* 1 *3