Yaskawa Matrix Converter - Manual (Page 390)

10
-20
Table 10.2 Parameters (Continued)
E2-07
Motor Iron-Core Saturation Coef-
ficient 1
0.50
E2-08
Motor Iron-Core Saturation Coef-
ficient 2
0.75
E2-09 Motor Mechanical Loss 0.0
E2-10
Motor Iron Loss for Torque Com-
pensation
172 *2
E2-11 Motor Rated Output 5.50 *2
E2-12
Motor Iron-Core Saturation Coef-
ficient 3
1.30
E3-01 Motor 2 Control Method Selection 2
E3-02
Motor 2 Maximum Output Fre-
quency
60.0 *1
E3-03 Motor 2 Maximum Output Voltage 200.0
*1 *3
E3-04 Motor 2 Base Frequency 60.0 *1
E3-05 Motor 2 Mid Output Frequency 3.0 *1
E3-06 Motor 2 Mid Output Voltage VA
13.0
*1 *3
E3-07
Motor 2 Minimum Output Fre-
quency
0.5 *1
E3-08 Motor 2 Minimum Output Voltage
2.5
*1 *3
E4-01 Motor 2 Rated Current 19.60 *2
E4-02 Motor 2 Rated Slip 1.50 *2
E4-03 Motor 2 No-Load Current 5.10 *2
E4-04 Motor 2 Number of Poles 4
E4-05 Motor 2 Line-to-Line Resistance 0.399 *2
E4-06 Motor 2 Leakage Inductance 18.2
*2
E4-07 Motor 2 Rated Output 5.50 *2
F1-01 PG Parameter 600
F1-02
Operation Selection at PG Open
Circuit (PGO)
1
F1-03
Operation Selection at Overspeed
(OS)
1
No. Name Default
Set-
ting
F1-04 Operation Selection at Deviation 3
F1-05 PG Rotation Selection 0
F1-06
PG Division Rate (PG Pulse Moni-
tor)
1
F1-08 Overspeed Detection Level 115
F1-09 Overspeed Detection Delay Time 0.0
F1-10
Excessive Speed Deviation Detec-
tion Level
10
F1-11
Excessive Speed Deviation Detec-
tion Delay Time
0.5
F1-14 PG Open-Circuit Detection Time 2.0
F2-01 AI-14 Input Selection 0
F3-01 DI-08 / DI-16H2 Input Selection 0
F4-01
AO-08/AO-12 Channel 1 Monitor
Selection
2
F4-02 AO-08/AO-12 Channel 1 Gain 1.00
F4-03
AO-08/AO-12 Channel 2 Monitor
Selection
3
F4-04 AO-08/AO-12 Channel 2 Gain 0.50
F4-05
AO-08/AO-12 Channel 1 Output
Bias
0.0
F4-06
AO-08/AO-12 Channel 2 Output
Bias
0.0
F4-07 AO-12 Channel 1 Signal Level 0
F4-08 AO-12 Channel 2 Signal Level 0
F5-01
DO-02/DO-08 Channel 1 Output
Selection
0
F5-02
DO-02/DO-08 Channel 2 Output
Selection
1
F5-03 DO-08 Channel 3 Output Selection 2
F5-04 DO-08 Channel 4 Output Selection 4
F5-05 DO-08 Channel 5 Output Selection 6
F5-06 DO-08 Channel 6 Output Selection 37
No. Name Default
Set-
ting