Yaskawa Matrix Converter - Manual (Page 389)

Parameters
10-
19
10
Table 10.2 Parameters (Continued)
d1-07 Frequency Reference 7 0.00
d1-08 Frequency Reference 8 0.00
d1-09 Frequency Reference 9 0.00
d1-10 Frequency Reference 10 0.00
d1-11 Frequency Reference 11 0.00
d1-12 Frequency Reference 12 0.00
d1-13 Frequency Reference 13 0.00
d1-14 Frequency Reference 14 0.00
d1-15 Frequency Reference 15 0.00
d1-16 Frequency Reference 16 0.00
d1-17 Jog Frequency Reference 6.00
d2-01 Frequency Reference Upper Limit 100.0
d2-02 Frequency Reference Lower Limit 0.0
d2-03
Master Speed Reference Lower
Limit
0.0
d3-01 Jump Frequency 1 0.0
d3-02 Jump Frequency 2 0.0
d3-03 Jump Frequency 3 0.0
d3-04 Jump Frequency Width 1.0
d4-01
Frequency Reference Hold Func-
tion Selection
0
d4-02 Trim Control Level 10
d5-01 Torque Control Selection 0
d5-02 Torque Reference Delay Time 0
d5-03 Speed Limit Selection 1
d5-04 Speed Limit 0
No. Name Default
Set-
ting
d5-05 Speed Limit Bias 10
d5-06
Speed/Torque Control Switchover
Timer
0
d6-01 Magnetic Field Weakening Level 80
d6-02 Magnetic Field Frequency 0.0
d6-03
Magnetic Field Forcing Function
Selection
0
d6-06 Magnetic Field Forcing Limit 400
E1-01 Input Voltage Setting 200 *3
E1-03 V/f Pattern Selection F
E1-04 Maximum Output Frequency 60.0
*1
E1-05 Maximum Output Voltage
200.0
*1 *3
E1-06 Base Frequency 60.0 *1
E1-07 Mid Output Frequency A 3.0 *1
E1-08 Mid Output Voltage A
13.0
*1 *3
E1-09 Minimum Output Frequency 0.5
*1
E1-10 Minimum Output Voltage 2.5 *1 *3
E1-11 Mid Output Frequency B 0.0 *4
E1-12 Mid Output Voltage B 0.0 *4
E1-13 Base Voltage 0.0 *5
E2-01 Motor Rated Current 19.60 *2
E2-02 Motor Rated Slip 1.50
*2
E2-03 Motor No-Load Current 5.10 *2
E2-04 Number of Motor Poles 4
E2-05 Motor Line-to-Line Resistance 0.399 *2
E2-06 Motor Leakage Inductance 18.2 *2
No. Name Default
Set-
ting