HEIDENHAIN SW 54843x-03 DIN Programming - Manual (Page 589)

HEIDENHAIN MANUALplus 620, CNC PILOT 640 589
8.3 Simulation
Displaying the coordinate system
The simulation can show the shifted/rotated coordinate system in the
"lathe window," if required. To use this feature, you need to stop the
simulation.
 Press the Plus/Minus key. The simulation displays the
current coordinate system.
The coordinate system disappears when the next command is
simulated or when you press the Plus/Minus key once again.
Position display with the B and Y axes
The following boxes of the display cannot be edited:
 N: Block number of the NC source block
 X, Z, C: Position values (actual values)
The other boxes can be set with the Split-Screen Layout key (three
arrows arranged in a circle):
 Default settings (values of the selected slide):
 Y: Position value (actual value)
 T: Tool data with turret pocket (in "(..)") and ID number
 B axis settings:
 B: Tilt angle of the B axis
 G16/B: Angle of the tilted plane