HEIDENHAIN SW 54843x-03 DIN Programming - Manual (Page 248)

248 DIN Programming
4.9 T
o
ol positioning
4.9 Tool positioning
Rapid traverse G0
G0 moves at rapid traverse along the shortest path to the target point.
Rapid traverse to machine coordinates G701
G701 moves at rapid traverse along the shortest path to the target
point.
Parameters
X
Target point (diameter)
Z Target point
Programming X, Z: Absolute, incremental or modal
If more axes are available on your machine, additional
input parameters will be displayed, e.g. parameter B for
the B axis.
Parameters
X
End point (diameter)
Z End point
X, Z refer to the machine zero point and the slide zero
point.
If more axes are available on your machine, additional
input parameters will be displayed, e.g. parameter B for
the B axis.