HEIDENHAIN SW 54843x-03 DIN Programming - Manual (Page 383)

HEIDENHAIN MANUALplus 620, CNC PILOT 640 383
4.29 Other G codes
Read interpolation information G904
G904 transfers all the current interpolation information on the current
slide to the variable memory.
Feed rate override 100 % G908
G908 sets the feed override for traverse paths (G0, G1, G2, G3, G12,
G13) block by block to 100 %.
Program G908 and the traverse path in the same NC block.
Interpreter stop G909
The Steuerung pre-interprets the NC blocks. If variables are assigned
shortly before the evaluation, "old values" would be processed. G909
stops the pre-interpretation. The NC blocks are processed up to G909.
Only after G909, are the subsequent NC blocks processed.
Apart from G909, the NC block should only contain synchronous
functions. (Some G codes generate an interpreter stop.)
Spindle override 100 % G919
G919 is used to deactivate/activate the spindle speed override.
Interpolation information syntax
Syntax: #an(axis,channel)
 n = number of the information
 axis = name of the axis
 channel = slide number
Interpolation information
#a0(Z,1) Zero-point shift of the Z axis of slide $1
#a1(Z,1) Actual position of the Z axis of slide $1
#a2(Z,1) Nominal position of the Z axis of slide $1
#a3(Z,1) Lag error of the Z axis of slide $1
#a4(Z,1) Distance to go in the Z axis of slide $1
#a5(Z,1) Logical axis number of the Z axis of slide $1
#a5(0,1) Logical axis number of the main spindle
#a6(0,1) Rotational direction of main spindle $1
#a9(Z,1) Trigger position of the touch probe
#a10(Z,1) IPO axis value
Parameters
Q
Spindle number (default: 0)
H Type of limit (default: 0)
 0: Activate spindle speed override
 1: Spindle override at 100 %—modal
 2: Spindle override at 100 %—for the current NC block