HEIDENHAIN SW 54843x-03 DIN Programming - Manual (Page 554)

554 TURN PLUS
7.
2 A
u
to
matic w
o
rk
ing plan g
e
ner
a
tion (A
WG)
Press the "Back" soft key to return to the TURN PLUS
menu.
Press the "Back" soft key to switch to smart.Turn.
Use the name of the current program without any
changes and press the "Save" soft key to overwrite
the current program.
Enter a name for the program and confirm with the
"Save" soft key.
Machining sequence—Fundamentals
TURN PLUS analyzes the contour in the sequence defined in
"Machining sequence." In this process the areas to be machined and
the tool parameters are ascertained. The AWG analyzes the contour
using the machining parameters.
TURN PLUS distinguishes between:
 Main machining operation (e.g. Undercutting)
 Submachining operation (e.g. type H, K, or U)
 Machining location (e.g. outside or inside)
"Submachining" and "machining location" refine the machining
specification. If you do not define the submachining operation or
machining location, the AWG generates machining blocks for all
submachining operations/machining locations.